Shop
Read
My area
Flip the knife
blade
handle
top view

Florentine Slicer Scaled

The Florentine Slicer is a straight edged blade, mainly meant for slicing protein or anything you need to cut in one long motion. A hidden tang assembly featuring scales, liners and a core, fastened with either Brass or Stainless Steel rivets. Delivery time 2-4 weeks.

BLADE LENGTH: 270mm
BLADE WIDTH: 35mm
OVERALL LENGTH: 410mm 
APPROX WEIGHT: 250gr 
STEEL: 14C28N Stainless Steel / XC75 Carbon Steel
HARDNESS: 60 HRC
EDGE: 50/50

A1.HANDLE DESIGN
A2.MICARTA AND WOOD SCALES
A3.RIVETS
A4.LINER
A5.CORE
B.BLADE STEEL AND FINISH Compare

Please note carbon blades will rust if not well taken care of

OK
C1.LASER ETCHING
  • + €10
C2.ADD ACCESSORIES
  • -1+

    A handcrafted, tanned or Black leather blade guard with an integral, easy lock and release system to keep your knives protected from scratches, humidity and keep your edge sharp. Compatible with Florentine Bread and Slicer knives.

  • -1+

    A handcrafted, tanned or Black leather blade guard with an integral, easy lock and release system to keep your knives protected from scratches, humidity and keep your edge sharp. Compatible with Florentine Bread and Slicer knives.

C3.NOTES
Images are for illustration purposes only, colours may vary Delivery time 4 - 6 weeks Please note carbon blades will rust if not well taken care of
TOTAL €

STAINLESS STEEL

Satin

A brushed semi-matt finish with vertical lines.

STEEL: 14C28N
HARDNESS: 59-60hrc

Hand Sanded

A semi-matt hand rubbed finish with horizontal lines.

STEEL: 14C28N
HARDNESS: 59-60hrc
COUNTRY OF ORIGIN: Sweden
MILL: sandvik
SHARPENING:

Intermediate, Whetstones or quality sharpening systems recommended.

GENERAL INFORMATION:

Sharpens quite easily and takes a very sharp edge. The alloy offers a good balanced combination of corrosion resistance, edge stability, wear resistance and strength.

EASE OF CARE:

Stainless Steels are forgiving and require relatively little care.

CARBON STEEL

Hand sanded

A semi-matt hand rubbed finish with horizontal lines.

STEEL: XC90
HARDNESS: 59-60hrc

Forced patina

An acid induced protective layer applied on a hand sanded finish.

STEEL: XC90
HARDNESS: 59-60hrc

leopard patina

A patterned protective layer induced by mustard and acid on a hand sanded finish.

STEEL: XC90
HARDNESS: 59-60hrc
COUNTRY OF ORIGIN: France
MILL: Anfor
SHARPENING:

Easy, Whetstones or quality sharpening systems recommended.

GENERAL INFORMATION:

Sharpens very easily and takes a very sharp edge. The alloy offers almost no corrosion resistance and needs to be kept well. However, edge stability, wear resistance and strength are good and will age beautifully with good care.

EASE OF CARE:

Not a very forgiving steel, will rust if not well taken care of.

HIGH CARBON STEEL

Hand Sanded Forced Patina

An acid induced protective layer applied on a hand sanded finish.

STEEL: C130
HARDNESS: 61+62HRC
COUNTRY OF ORIGIN: France
MILL: Anfor
SHARPENING:

Intermediate (recommended whetstones or quality sharpening systems)

GENERAL INFORMATION:

This steel sharpens quite easily and takes an extremely sharp edge. This alloy offers no corrosion resistance. Because of it's hardness it offers less resistance to chipping or breaks, but has a very high edge holding and strength.

EASE OF CARE:

A very unforgiving steel. Must be well cared for.

STAINLESS STEEL

Satin

A brushed semi-matt finish with vertical lines.

STEEL: 14C28N
HARDNESS: 59-60hrc

Hand sanded

A semi-matt hand rubbed finish with horizontal lines.

STEEL: 14C28N
HARDNESS: 59-60hrc
COUNTRY OF ORIGIN: Sweden
MILL: Sandvik
SHARPENING:

Intermediate, Whetstones or quality sharpening systems recommended.

GENERAL INFORMATION:

Sharpens quite easily and takes a very sharp edge. The alloy offers a good balanced combination of corrosion resistance, edge stability, wear resistance and strength.

EASE OF CARE:

Stainless Steels are forgiving and require relatively little care.

CARBON STEEL

Hand sanded

A semi-matt hand rubbed finish with horizontal lines.

STEEL: XC90
HARDNESS: 59-60hrc

Forced patina

An acid induced protective layer applied on a hand sanded finish.

STEEL: XC90
HARDNESS: 59-60hrc

Leopard patina

A patterned protective layer induced by mustard and acid on a hand sanded finish.

STEEL: XC90
HARDNESS: 59-60hrc
COUNTRY OF ORIGIN: France
MILL: Anfor
SHARPENING:

Easy, Whetstones or quality sharpening systems recommended.

GENERAL INFORMATION:

Sharpens very easily and takes a very sharp edge. The alloy offers almost no corrosion resistance and needs to be kept well. However, edge stability, wear resistance and strength are good and will age beautifully with good care.

EASE OF CARE:

Not a very forgiving steel, will rust if not well taken care of.

STAINLESS STEEL

Satin

A brushed semi-matt finish with vertical lines.

STEEL: 14C28N
HARDNESS: 59-60hrc
COUNTRY OF ORIGIN: Sweden
MILL: Sandvik
SHARPENING:

Intermediate, Whetstones or quality sharpening systems recommended.

GENERAL INFORMATION:

Sharpens quite easily and takes a very sharp edge. The alloy offers a good balanced combination of corrosion resistance, edge stability, wear resistance and strength.

EASE OF CARE:

Stainless Steels are forgiving and require relatively little care.

close