Accessories

Here you will find complementary products to accompany your knives. From professional sharpening systems, through knife care and kitchen products.

STONE GRADER

€20,50

With the Stone Grader SP-650 you can change the grit size of the Tormek original grindstone to give a finer sharpening surface. The other side of the Stone grader is used to maintain the grindstone, bringing new abrasive grains to the surface for an effective sharpening.

The Tormek Original Grindstone is designed so that it can be treated with the Stone Grader to change its quality from fast grinding to fine sharpening. This has obvious advantages. Once you have created the desired shape on your tool, for example a chisel, you can get an even finer edge using the same grindstone and the same grinding machine with the same jig and settings. Besides being convenient not having to change equipment, you are guaranteed to get exactly the same edge angle.

Change to fine sharpening

If you want to adjust the stone to a finer sharpening, press the fine side of the stone grader towards the stone surface for about 30 seconds. This will alter the function of the surface of the Tormek Original Grindstone (220 grit) making it work like a 1000 grit stone.

Activating the grindstone:

When you want to go back to the original 220 grit, simply press the coarse side towards the stone for a few seconds until you can notice the stone surface changing.

To keep the stone fresh and efficient, use the coarse side of the stone grader when you see it is needed. Press it firmly with your hands for about 30 seconds. This process does not place excessive wear on the grindstone and can be repeated any number of times.

COMPOSITE HONING WHEEL

€63,50

The Composite Honing Wheel has integrated polish to remove the burr and is easy to use. Fits Tormek T-8, Tormek T-7 and Tormek 2000. The Composite Honing Wheel is suitable to use in clean environments since there's no need to add honing compound.

Tip: Moisten the composite honing wheel with some water for a smoother honing. Use a sponge or cloth.

LEATHER HONING WHEEL

€55,40

The LA-220 Leather Honing Wheel gently removes the burr which develops during grinding and polishes the bevel. Fits Tormek T-8, Tormek T-7 and Tormek 2000. It is used together with Tormek Honing Compound PA-70. To get the highest possible sharpness on your edge tool, you finish the sharpening process by honing your tool on the Leather Honing Wheel.

ROTATING BASE

€39

The RB-180 enables you to easily rotate the machine 180° and lock it with complete stability. You can alternate between sharpening and honing, or sharpening towards or away from the edge in seconds.

Some tools are best sharpened with the stone running towards the edge and other tools should have the stone running away from the edge. With the Tormek Rotating Base RB-180, you can easily rotate the machine 180° to select the ideal sharpening direction.

The Rotating Base also makes it easy to switch from sharpening to honing. Honing is always carried out with the honing wheel running away from the edge, otherwise the tool will cut into the leather.

TRUING TOOL

€61,50

If your grindstone has become uneven, it is easily fixed with the Tormek Diamond Truing and Dressing Tool TT-50. It will make your stone perfectly round and flat again.

UNIVERSAL SUPPORT WITH MICRO ADJUST

€30,80

 The Universal Support is the basis for all Tormek jigs. It is made of 12 mm (approx. 1/2") round steel and has a double mounting for maximum stability. US-105 has a square cut Acme style thread which prevents damage by the locking screws and a Micro Adjust with scale for precise setting of the edge angle and cutting depth. Fits Tormek T-8, Tormek T-7 and Tormek 2000.

Functions:
Support for the grinding jigs.
Support for the TT-50 Truing Tool.
Rest for your hands when using the Stone Grader SP-650.

Can be placed in these positions:
Vertically for sharpening towards the edge.
Horizontally for sharpening with the edge.
Horizontally at the honing wheel side for honing.

T-8 STORAGE TRAY

Sale price €9 Regular price €16,40

The T8-00 Storage Tray stores all the accessories included with the Tormek T-8. The storage tray has an improved design and is customized to fit in the Tormek Case TC-800 and the Sharpening Station TS-740. The storage tray is made of EPP, a permanent construction material that is durable and ready for many years of holding jigs in their places.

Designed to hold:
WM-200 AngleMaster
HB-10 Tormek Handbook
SP-650 Stone Grader
PA-70 Honing Compound
TT-50 Truing Tool
SE-77 Square Edge Jig

TORMEK ORIGINAL GRINDSTONE 250MM

€133,50

The Tormek Original Grindstone has evolved over the years to offer the best combination of efficient steel removal, smooth surface finish and a long life. SG-250 is delivered as standard with Tormek T-8.

This grinding stone is the ideal choice when you want both efficient steel removal and a fine finish in the same stone over a wide variety of materials, from carbon steel to high speed steel. It works with all types of tools and steel qualities including HSS.

DIAMOND WHEEL

From €210

Included with every diamond wheel is 150 ml ACC-150 Anti-Corrosion Concentrate. Always use the concentrate in the water when sharpening with water to prevent rust on the grinding wheel. Add 10 ml of concentrate to 250 ml water (~ 4%). We recommend to always use water when sharpening with the diamond wheel, as it prolongs the life of the wheel and provides a finer surface. It is also possible to sharpen without water. 

The Tormek Diamond Wheel Extra Fine with a grit size of 1200 leaves an extra fine finish and is especially suitable for carving tools and knives when the need for steel removal is minimal. You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-8, Tormek T-7 and previous models with a 250 mm stone diameter.

The Tormek Diamond Wheel Fine with a grit size of 600 is the ultimate all round wheel combining efficient steel removal with smooth surface finish which makes it the perfect versatile wheel. You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-8, Tormek T-7 and previous models with a 250 mm stone diameter.

The Tormek Diamond Wheel Coarse has a grit size of 360 for fast steel removal when shaping and a rapid repair of a dull or damaged edge. You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-8, Tormek T-7 and previous models with a 250 mm stone diameter.

BLACKSTONE SILICON 250MM

€158

Tormek Blackstone Silicon has been developed for shaping and sharpening* HSS and other exotic alloyed steels. It can also touch up tungsten carbide. It does not offer faster steel removal on ordinary carbon steel than the Tormek Original Grindstone.

The combination of abrasive hardness, shape and grain size is optimised to work efficiently at the Tormek system’s low RPM. Its faster material removal is an advantage especially when shaping tools with a large bevel surface, where the grinding pressure is limited, for example, planer blades and woodturning skews.

The grit size 220 is the same as the Tormek Original Grindstone and can be altered to work like a 1000 grit stone with the Stone Grader SP-650. Thanks to its sharp and relatively small grains, the Blackstone removes hard steel efficiently even at low grinding pressure. It can even touch up tungsten carbide, where the tool already has an established shape.

Fits Tormek T-8, Tormek T-7 and previous Tormek models with a 250 mm stone diameter.

JAPANESE WATERSTONE

From €159

The T-8 Japanese Waterstone 4000 grit delivers a mirror finish with hardly any visible marks. This waterstone excels at sharpening hand tools like carving tools, knives, scissors, plane irons and wood chisels where a minimum amount of steel removal is needed and a superior surface finish is required. It has an extremely long life. Fits Tormek T-8. For the smaller Tormek models, see the Tormek Japanese Waterstone 200mm. 

The T-4 200mm is the smaller version of the Tormek Japanese Waterstone, and has the same composition and qualities as the Japanese Waterstone 250mm. The Japanese Waterstone 200mm fits the Tormek T-4.